M12 CONNECTOR - 12P A CODE F RA BRASS TPU
Part Number i12NS1T-12AS2XXX-XXXX
The i12 12P A Code F RA Brass TPU Cable Assembly has an ingress protection rating of IP67/IP69. The voltage rating (RMS) is up to 300V and the Amperage Rating of this Cable Assembly is up to 7.5A. The Receptacle Mounting is a PG9 Thread and the Basic Plug Max. OD is .56in. DIA. Over Coupling Nut. The max cable diameter is 0.33 and the Overmold Length with Strain Relief is 1.14in. For additional details please refer to the specifications section below.
M12 CONNECTOR - 12P A CODE F RA BRASS TPU - specifications
- Materials:
- Dimensions:
- Performance:
- Options:
Materials:
- Contact Carrier Mineral Filled PA
- Coupling Nut Nickel Plated Brass or Stainless Steel
- Panel Mount Housing Nickel Plated Brass or Stainless Steel
- Jam Nut Nickel Plated Brass or Stainless Steel
- Mounting Gasket / O-ring Buna
- Contacts CU Alloy, Gold Over Nickel Plating
- Connector Interface Sealing O-ring Silicone
- Overmold Overmold Material will vary depending on cable selection (PVC, TPU, or other)
Dimensions:
- Receptacle Mounting PG9 Thread
- Basic Plug Max. OD .56in. DIA. Over Coupling Nut
- In-Line Receptacle Max. OD .56in. DIA. Over Coupling Nut
- Overmold Length with Strain Relief 1.14in.
- Max Cable Diameter 0.33in. DIA.
- Contact Sizes Available (max. #) #24 (12), #22 (8), #20 (5)
Performance:
- Ingress Protection IP 67 / IP69K
- Voltage Rating (RMS) Up to 300V
- Amperage Rating Up to 7.5A
- Max Continuous Temperature Overmold material and wire / cable selection will influence the overall max temperature rating of the assembly (80-105 degrees C)
Options:
- High-tech polymer and machined brass or stainless steel components Closed entry female contact design
- Threaded or push-pull (snaplock) construction Variety of Overmold resins available
- PC Tail contacts available for panel mount receptacles #28 thru #20 wire size range
- Panel mount receptacle / inline receptacle / overmolded plug available
