Part Number i12R01B-12AP22-XXXX

The i12 12P A Code M Panel Front has an ingress protection rating of IP67 / IP69K. The Voltage Rating (RMS) for these rear connectors is up to 300V and the Amperage Rating is up to 7.5A. The Receptacle Mounting is a PG9 Thread and the Basic Plug Max. OD is 56in. DIA. Over Coupling Nut for these rear connectors. For additional details please refer to the specifications section below.

Request a Quote

i12 12P A CODE M PANEL REAR - specifications

  • Materials:
  • Dimensions:
  • Performance:
  • Options:


  • Contact Carrier Mineral Filled PA
  • Coupling Nut Nickel Plated Brass or Stainless Steel
  • Panel Mount Housing Nickel Plated Brass or Stainless Steel
  • Jam Nut Nickel Plated Brass or Stainless Steel
  • Mounting Gasket / O-ring Buna
  • Contacts CU Alloy, Gold Over Nickel Plating
  • Connector Interface Sealing O-ring Silicone
  • Overmold Overmold Material will vary depending on cable selection (PVC, TPU, or other)


  • Receptacle Mounting PG9 Thread
  • Basic Plug Max. OD .56in. DIA. Over Coupling Nut
  • In-Line Receptacle Max. OD .56in. DIA. Over Coupling Nut
  • Overmold Length with Strain Relief 1.14in.
  • Max Cable Diameter 0.33in. DIA.
  • Contact Sizes Available (max. #) #24 (12), #22 (8), #20 (5)


  • Ingress Protection IP 67 / IP69K
  • Voltage Rating (RMS) Up to 300V
  • Amperage Rating Up to 7.5A
  • Max Continuous Temperature Overmold material and wire / cable selection will influence the overall max temperature rating of the assembly (80-105 degrees C)


  • High-tech polymer and machined brass or stainless steel components Closed entry female contact design
  • Threaded or push-pull (snaplock) construction Variety of Overmold resins available
  • PC Tail contacts available for panel mount receptacles #28 thru #20 wire size range
  • Panel mount receptacle / inline receptacle / overmolded plug available

Not finding the right connector? Customize your own!