M8 CONNECTOR - 3P MALE SiNGLE ENDED CABLE, SNAPLOCK
Part Number i8NS3T-03P1-XXXX
The i8 3P Male Single Ended Cable Snaplock cable assembly is equipped with an ingress protection rating of IP67. The Voltage Rating (RMS) for this product is up to 300V and the Amperage Rating for this up to 7.5A. The Receptacle Mounting is an M8 Thread and the Basic Plug Max. OD is a .39in. DIA. Over Coupling Nut. For more details please refer to the specifications table below.
M8 CONNECTOR - 3P MALE SiNGLE ENDED CABLE, SNAPLOCK - specifications
- Materials:
- Dimensions:
- Performance:
- Options:
Materials:
- Contact Carrier Mineral Filled PA
- Coupling Nut N/A
- Panel Mount Housing Nickel Plated Brass or Stainless Steel
- Jam Nut Nickel Plated Brass or Stainless Steel
- Mounting Gasket / O-ring Buna
- Contacts CU Alloy, Gold Over Nickel Plating
- Connector Interface Sealing O-ring Silicone
- Overmold Overmold Material will vary depending on cable selection (PVC, TPU, or other)
Dimensions:
- Receptacle Mounting M8 Thread
- Basic Plug Max. OD .39in. DIA. Over Coupling Nut
- In-Line Receptacle Max. OD .39in. DIA. Over Coupling Nut
- Overmold Length with Strain Relief 1.07in.
- Max Cable Diameter 0.2in. DIA.
- Contact Sizes Available (max. #) #23 (6), #20 (4)
Performance:
- Ingress Protection IP 67
- Voltage Rating (RMS) Up to 300V
- Amperage Rating Up to 7.5A
- Max Continuous Temperature Overmold material and wire / cable selection will influence the overall max temperature rating of the assembly (80-105 degrees C)
Options:
- High-tech polymer and machined brass or stainless steel components Closed entry female contact design
- Threaded or push-pull (snaplock) construction Variety of Overmold resins available
- PC Tail contacts available for panel mount receptacles #28 thru #20 wire size range
- Panel mount receptacle / inline receptacle / overmolded plug available
